Cart

Your cart is currently empty.

Bunny Castle Assembly Instructions

 

These assembly instructions show you how to assemble a Bunny Castle. However, if you are the proud owner of a Mega Bunny Castle, a Bunny Tower, or a Bunny Fort, not to worry! The assembly instructions are identical. 

Assembling your Bunny Castle is very simple - it requires no tools, and should take about 5 mins

Step 1: Unpack your castle. Your Bunny Castle shipment will have 1 tall tower, 1 short tower, and 1 connecting tunnel flat packed. If you have a Mega Bunny Castle, it contains 2 tall towers, 1 short tower, and 1 connecting tower. 

 

 

Step 2: Fold down the tabs of your castle on the sides and the front. The folded tabs help provide strength and stability to your castle.

 

Step 3: Insert the front and side tabs in to the slots

 

Step 4: Position the towers over the slots in the tunnel to connect the pieces and you are all done!

 

If you purchased a Mega Bunny Castle, see below for some ideas for castle layout. You can also create infinite expansion options with additional Bunny Towers, Bunny Fortresses, or Bunny Tunnels. Create a Medieval fortress or the Palace of Versaille - your imagination is limitless! See some our suggested expansion options below.

 

Bunny Playhouse Assembly Instructions

These assembly instructions show you how to assemble a Bunny Playhouse. If you are the proud owner of a Mega Bunny Castle, a Bunny Tower, or a Bunny Fort, please see the Bunny Castle tab! The assembly instructions are identical across the sets. 

Assembling your Bunny Playhouse is very simple - it requires no tools, and should take about 5 mins. 

Step 1: Unpack your playhouse. Your Bunny Playhouse shipment will have 1 tall tower, 1 base floor, 1 scratch pad, 6 hanging toys, 2 tubes, and 3 pieces of rope for the rope course. 

Step 2: Place the scratch pad on top of the base floor, making sure to line up the holes for the rope course on both pieces as pictured below.

Step 3: Fold in the side tabs on the base floor over the scratch pad. And fold down the top overhang piece to snap the tabs in to the floor as pictured in the arrow below.

Repeat the same on the other side and you should have a completed floor.

Step 4: Take the rope for the rope course and thread the 3 pieces of rope through the 3 holes. Knot the rope at the ends and cut off the excess length as needed. You can save the excess for rope for further bunstruction! You are now done with the base floor!

Step 5: Take the tall tower piece and construct the tower. Fold down the tabs of your castle on the sides and the front and insert the front and side tabs in to the slots to get the final castle below. See the assembly instructions for the bunny castle if you would like more detailed instructions for this piece. 

Step 6: Slide the 2 tubes in to the tube openings above the windows in the tower. 

Step 7: Tie on the dangle toys (there should be 2 willow balls with dried apples, 2 plain willow balls, 2 willow hearts) on to the tubes. 

Step 8: Place your tower on to the base floor and you have a completed Bunny Playhouse! 

Got questions? Email us at Info@BunnyBliss.com and a service representative will be with you shortly!

Translation missing: en.general.search.loading